AEROSOL GLUE 500 ml STRATOGRIP

STRATOGRIP O500 is our new generation of adhesives using innovative solvent technology. The adhesive presents a low risk to human health due to its low toxicity and has a minimal impact on the environment. This adhesive has all the required advantages, a strong bond, high heat resistance and short drying times, and it is chlorine-free. It has been designed for bonding synthetic foams and fabrics or other materials in the manufacture of orthopaedic insoles. Always start by testing a small sample of materials to make sure the product is suitable for the application. The product is NOT RECOMMENDED for use on plastic-coated vinyl, flexible plastics, expanded or extruded polystyrene, or through-dyed laminates (monochrome type). SPECIFICATIONS - Non-chlorinated - High temperature resistance - Limited health risks - Long tack range - Fast drying - Free from ozone-depleting substances (ODS)TECHNICAL DATA' Drying time: 1-2 min' Colour: Clear' Spray: Web' Solvent: Hydrocarbon' % solids: 27% ' Coverage: 140 m²' Shear adhesion failure temperature (SAFT): + 100 °CSTORAGE, CONSERVATION & FLAMMABILITY Stratogrip O500 contact adhesive is guaranteed for 12 months from the date of manufacture. Do not allow the product to freeze. Always return to room temperature before use to ensure correct spraying. Do not store the product directly on a concrete floor and do not expose to temperatures above 50 °C. Extremely flammable. Keep the product away from all sources of heat/sparks/flames/hot surfaces. Do not smoke nearby, or spray near a flame or any other heat source. Pressurised canister: do not pierce or burn, even after use. Read and ensure you understand the safety data sheet and precautions before use. Dispose of contents/canister in accordance with current national regulations.